Microlighters

This is attach to a used 503. This device attached to the magneto end starter.
It seems faulty and i like to replace it. Any idea where i can find it?
tx

If it is connected to the starter then it is the Solenoid, i.e. the relay for the starter.

Effectively you use a light current, i.e. a thin wire from the starter switch to enable the solenoid. The solenoid then uses a thick plate to connect the two fat wires together and the starter turns. A normal starter/ignition switch can never handle the high current the starter motor draws

Try any Midas shop.

Morph wrote:If it is connected to the starter then it is the Solenoid, i.e. the relay for the starter.

Effectively you use a light current, i.e. a thin wire from the starter switch to enable the solenoid. The solenoid then uses a thick plate to connect the two fat wires together and the starter turns. A normal starter/ignition switch can never handle the high current the starter motor draws

Try any Midas shop.

Good to hear from you Greg. Still flying?

Not recently

Thanks............so good. Will get it..

Greg,
Same here. Looking up at every sound higher than 10 feet!!
Ampere, sorry for the high jack.

I had the same problem on my windlass wen we fit n starter , ja the blerriesollenooi dont work so i go to grobbies scrapjaard in Warmbad en buy one from n old ford escort kArretjie for cheap and it work well willempie