As suggested by FAWG, Ill post my progress if there seems to be interest.
I bought the KIT#2 with engine mount, exhaust and prop from kit3.
Below is the kit as recieved, all nicely packed.
![Image](http://www2.autopage.co.za/iw/wow.jpg)
First step was making a building table out of the box top - just fitted into the garage...
![Image](http://www2.autopage.co.za/iw/IMG_08551.jpg)
Next I made or procured the basic tools.
![Image](http://www2.autopage.co.za/iw/IMG_1400s.jpg)
The wing structure builds fast, longest time is spent cleaning the parts and straightening the edges to 90Degs.
![Image](http://www2.autopage.co.za/iw/wing.jpg)
Building the Flapperons
![Image](http://www2.autopage.co.za/iw/Aeliron.jpg)
Using straps and some wood to pull the skin over the slats
![Image](http://www2.autopage.co.za/iw/slat.jpg)
Again using straps to pull the skin on the Horz Stab
![Image](http://www2.autopage.co.za/iw/IMG_1161.jpg)
Fin and rudder complete less the plastic tips..
![Image](http://www2.autopage.co.za/iw/IMG_1166.jpg)
Here I use a little block of wood to 'pull' the plastic tip into the end of the flapperon.
![Image](http://www2.autopage.co.za/iw/IMG_1158.jpg)
A wooden profile to line up end covers on the Horz Stab
![Image](http://www2.autopage.co.za/iw/IMG_1205.jpg)
Completed Horz Tail, just the centre bracket to go..
![Image](http://www2.autopage.co.za/iw/IMG_1400.jpg)
At this stage slats, flaperons, Horz stab, elevator, fin and rudder are complete. next is to cover the wings.
Ok so tell me guys, should I continue to post ? Standard build pictures are available elsewhere on the net so I thought I should focus on school fees etc.. any comments ?
Cheers Ian