Cheetah with Rotax 914

Technical questions, advice, sharing information etc (aircraft, engines, instruments, weather and such)

Cheetah with Rotax 914

Postby AWACS » Sat May 26, 2012 5:58 pm

Guys,
Please elighten me.
Is there a Rainbow Cheeatah flying in the RSA fitted with a Roatx 914 turbo? Is it technically possible to do this installation?
Never heard of one..

Rgds
AWACS
Ready for the first flight
 
Posts: 49
Joined: Wed Oct 15, 2008 5:19 pm
Location: Centurion

Re: Cheetah with Rotax 914

Postby AWACS » Sat May 26, 2012 6:15 pm

Apologies Rotax 914 I meant...
AWACS
Ready for the first flight
 
Posts: 49
Joined: Wed Oct 15, 2008 5:19 pm
Location: Centurion

Re: Cheetah with Rotax 914

Postby JeanTree » Sat May 26, 2012 6:56 pm

AWACS wrote:Apologies Rotax 914 I meant...


vhpy Not really wrong in your first post , as the 914 IS a turbo engine :wink:
What happens to one does not matter, how one deals with it does.
Bushbaby S/n 002 (Taildragger)
Powered by Revmaster R2300 direct-drive
ZU-ANI
Jean Crous
JeanTree
Top Gun
Top Gun
 
Posts: 659
Joined: Sun Sep 19, 2010 6:31 pm
Location: Barrydale Western Cape

Re: Cheetah with Rotax 914

Postby Duck Rogers » Sun May 27, 2012 12:35 am

JeanTree wrote:
AWACS wrote:Apologies Rotax 914 I meant...


vhpy Not really wrong in your first post , as the 914 IS a turbo engine :wink:

Pay attention JanBoom..........the devil is in the detail. He said Roatx instead of Rotax.. vhpy vhpy
Airspeed, altitude, or brains....you always need at least two
User avatar
Duck Rogers
Toooooo thousand
Toooooo thousand
 
Posts: 2188
Joined: Tue Nov 29, 2005 9:49 pm
Location: West Rand

Re: Cheetah with Rotax 914

Postby JeanTree » Sun May 27, 2012 11:31 am

Duck Rogers wrote:
JeanTree wrote:
AWACS wrote:Apologies Rotax 914 I meant...


vhpy Not really wrong in your first post , as the 914 IS a turbo engine :wink:

Pay attention JanBoom..........the devil is in the detail. He said Roatx instead of Rotax.. vhpy vhpy


:oops: :oops: :oops: :oops: Aaag dankie Oom Eend :!:
What happens to one does not matter, how one deals with it does.
Bushbaby S/n 002 (Taildragger)
Powered by Revmaster R2300 direct-drive
ZU-ANI
Jean Crous
JeanTree
Top Gun
Top Gun
 
Posts: 659
Joined: Sun Sep 19, 2010 6:31 pm
Location: Barrydale Western Cape

Re: Cheetah with Rotax 914

Postby flybynite » Sun May 27, 2012 8:16 pm

I dont know of one but offer to be the test pilot for free!!!!!!!!!!!!!!!!!! vhpy vhpy (!!) I have a test pilot rating - promise :lol: :lol:
User avatar
flybynite
Solo cross country
Solo cross country
 
Posts: 127
Joined: Fri Aug 17, 2007 1:46 pm
Location: Faly

Re: Cheetah with Rotax 914

Postby JeanTree » Mon May 28, 2012 10:41 pm

flybynite wrote:I dont know of one but offer to be the test pilot for free!!!!!!!!!!!!!!!!!! vhpy vhpy (!!) I have a test pilot rating - promise :lol: :lol:


:twisted: :twisted: Sure you are not a "flybynite" :?: :lol: :lol: :lol:
What happens to one does not matter, how one deals with it does.
Bushbaby S/n 002 (Taildragger)
Powered by Revmaster R2300 direct-drive
ZU-ANI
Jean Crous
JeanTree
Top Gun
Top Gun
 
Posts: 659
Joined: Sun Sep 19, 2010 6:31 pm
Location: Barrydale Western Cape

Re: Cheetah with Rotax 914

Postby John Boucher » Tue May 29, 2012 10:43 am

582, 912ul, 912extra, 912 uls, Jab 2200, Verner 133 (boxer motor - shake, rattle & roll :shock: ) .... that's about all I know of.

I think there is a Jab 3300 installation in the USA but don't know of a 914 though. 914 installation should not be very much different to the 912 installations?
John Boucher
MISASA
Membership Communication & Administration
comms@misasa.org
User avatar
John Boucher
Three Thousand
Three Thousand
 
Posts: 3408
Joined: Mon Jan 29, 2007 5:23 pm
Location: Neither here, Nor there... ;-)

Re: Cheetah with Rotax 914

Postby Stephan van Tonder » Mon Jun 04, 2012 1:39 pm

Not that i know of but should not be hard or difficult to do. Would suggest you get the factory to do the install because it will be easier with the paperwork.
Nuts about Cheetahs. Petit is the place.
User avatar
Stephan van Tonder
Frequent microflyer
Frequent microflyer
 
Posts: 1376
Joined: Fri Aug 15, 2008 1:53 pm
Location: Kempton park / Petit


Return to Technical Talk

Who is online

Users browsing this forum: No registered users and 2 guests